PETERSON MFG

Sealed, 4 in round stop, turn and taillight may be used on both curbside and roadside of vehicle or trailer. Fully automated manufacturing process ensures consistent quality and reliability....

Sealed, 4 in round stop, turn and taillight may be used on both curbside and roadside of vehicle or trailer. Fully automated manufacturing process ensures consistent quality and reliability. Features extra wide, spin-welded, tongue-and-groove lens lip and waterproof seal. High performance, copper alloy conductors eliminate the possibility of wire failure. State-of-the art bulb design features three supports for the minor filament and two supports for the major filament providing long bulb...

Red grommet mount kit. 9 to 16 V operating range. Skirted weld joint for added protection against moisture. Does not require top positioning to meet FMVSS 108 standards. Compatible with 431-491...

Red grommet mount kit. 9 to 16 V operating range. Skirted weld joint for added protection against moisture. Does not require top positioning to meet FMVSS 108 standards. Compatible with 431-491 connecting plug. Proudly made in the USA.Unit: CD

Submersible LED rear lighting kit for trailers under 80 in wide. Solid state super bright LED diodes, 100,000 hrs rated life. Includes 840/840L LED taillights plus license bracket, mounting hardware...

Submersible LED rear lighting kit for trailers under 80 in wide. Solid state super bright LED diodes, 100,000 hrs rated life. Includes 840/840L LED taillights plus license bracket, mounting hardware and installation instructions.Unit: CD

Submersible rear lighting kit and reflectors for all trailers 80 in wide and over. Includes 856/856L LED taillights plus license bracket, mounting hardware and installation instructions. 7-15/16 in...

Submersible rear lighting kit and reflectors for all trailers 80 in wide and over. Includes 856/856L LED taillights plus license bracket, mounting hardware and installation instructions. 7-15/16 in W x 2-7/8 in H x 2-7/8 in D.Unit: CD

Provides alternating strobe-like action with 90 flashes per minute. Includes three powerful magnets on base for secure mounting and 12 ft coiled cord with cigarette lighter plug.Unit: CD

Provides alternating strobe-like action with 90 flashes per minute. Includes three powerful magnets on base for secure mounting and 12 ft coiled cord with cigarette lighter plug.Unit: CD

Solid state construction, no bulbs to break or burn out. 100,000 hrs rated life. Fully sealed, submersible construction. Potted circuitry(coated and sealed) protects against moisture, corrosion and...

Solid state construction, no bulbs to break or burn out. 100,000 hrs rated life. Fully sealed, submersible construction. Potted circuitry(coated and sealed) protects against moisture, corrosion and vibration. Lower amp draw than incandescent lights. Designed to directly replace 456-Series incandescent lights. Integral, dedicated side marker diode. Exceeds all DOT rear lighting and reflex requirements for trailers 80 in wide and over. 7-15/16 in W x 2-7/8 in H x 2-7/8 in D.Unit: CD

Sealed 2-diode LED light that functions as clearance or side marker light. Operates from 8 to 16 V. Hard-wired with separate lead and ground wires for mounting to all surfaces. Mounts on 1-15/16 in...

Sealed 2-diode LED light that functions as clearance or side marker light. Operates from 8 to 16 V. Hard-wired with separate lead and ground wires for mounting to all surfaces. Mounts on 1-15/16 in centers. 100,000 hrs rated life. Made in USA.Unit: EA

Acrylic lens in low-profile aluminum housing, completely rustproof. 3-15/16 in CTC mounting holes, 3-3/4 in H x 4-1/2 in W.Unit: EA

Acrylic lens in low-profile aluminum housing, completely rustproof. 3-15/16 in CTC mounting holes, 3-3/4 in H x 4-1/2 in W.Unit: EA

For light and medium-duty applications. 6-diode, oval LED light. Functions as a clearance or side maker light with built-in reflector optics, eliminating the need for separate reflector. Meets DOT...

For light and medium-duty applications. 6-diode, oval LED light. Functions as a clearance or side maker light with built-in reflector optics, eliminating the need for separate reflector. Meets DOT lighting requirements. Mounts on industry standard 3 in centers. Includes both lead and ground wire for mounting to all surfaces.Unit: EA

Provides rear lighting and reflectors for trailers. Lights feature easy maintenance and bulb replacement while maintaining gasket seal and grounding through a separate lead wire. Includes 2...

Provides rear lighting and reflectors for trailers. Lights feature easy maintenance and bulb replacement while maintaining gasket seal and grounding through a separate lead wire. Includes 2 low-profile, submersible combination taillights (1 with license light) that mount on slide-on 2 in centers, 25 ft trailer harness, 48 in trunk connector, license bracket, mounting hardware and installation instructions. Front sidemarker/clearance lights, side reflectors and rear identification lights are...

Tough molded acrylic lens. Used to replace lenses of Peterson No 440, 441, 444 and 452 series lights. 4-1/2 in square.Unit: CD

Tough molded acrylic lens. Used to replace lenses of Peterson No 440, 441, 444 and 452 series lights. 4-1/2 in square.Unit: CD

Features three 1/4 in mounting studs on 2 in triangular pattern. Includes stop, turn, tail, back-up and license light functions. Will fit Peterbilt, Mack, White and Jeep. 6-1/4 in W x 6-3/4 in H x...

Features three 1/4 in mounting studs on 2 in triangular pattern. Includes stop, turn, tail, back-up and license light functions. Will fit Peterbilt, Mack, White and Jeep. 6-1/4 in W x 6-3/4 in H x 2-3/4 in D overall.Unit: CD

Acrylic lens snaps onto housing. Two bulb lamp functions as clearance or side marker light and may be used as combination clearance and side marker when properly mounted on 3 in centers and grounded...

Acrylic lens snaps onto housing. Two bulb lamp functions as clearance or side marker light and may be used as combination clearance and side marker when properly mounted on 3 in centers and grounded through mounting hardware. Single wire for electrical connection. 15,000 hrs long life bulbs. 4 in W x 2 in H x 1-1/8 in D.Unit: CD

Features polycarbonate lens, galvanized steel base plate, dual-filament bulb and tough plastic guard to protect lead wires. 4-9/16 in W x 2-1/2 in H x 1-3/4 in D, mounts on 3-1/2 in x 1-1/2 in...

Features polycarbonate lens, galvanized steel base plate, dual-filament bulb and tough plastic guard to protect lead wires. 4-9/16 in W x 2-1/2 in H x 1-3/4 in D, mounts on 3-1/2 in x 1-1/2 in centers.Unit: EA

Kit with decorative snap-on chrome bezel included. Hard-wired design eliminates the need for separate plug and reduces connection points. Designed for horizontal installation. 9 to 16 V operating...

Kit with decorative snap-on chrome bezel included. Hard-wired design eliminates the need for separate plug and reduces connection points. Designed for horizontal installation. 9 to 16 V operating range. Meets FMVSS 108 requirements.Unit: CD

Plug with three 48 in wires and one 12 in ground wire.Unit: CD

Plug with three 48 in wires and one 12 in ground wire.Unit: CD

Under 80 in wide combination taillight. Includes the following functions - stop, turn, tail, rear reflex, side marker and side reflex. Includes lead wire. Grounds through 1/4 in mounting studs....

Under 80 in wide combination taillight. Includes the following functions - stop, turn, tail, rear reflex, side marker and side reflex. Includes lead wire. Grounds through 1/4 in mounting studs. Studs on 2 in centers.Unit: EA

For courtesy, interior or instrument lights, commonly used to illuminate license plate or step bumpers. Chrome-plated steel housing snaps into 1-1/4 in Dia holes. 1-1/2 in Dia overall. 2 required...

For courtesy, interior or instrument lights, commonly used to illuminate license plate or step bumpers. Chrome-plated steel housing snaps into 1-1/4 in Dia holes. 1-1/2 in Dia overall. 2 required for legal license illumination.Unit: CD

Acrylic lens snap-seals onto housing. Single wire connection, grounds through mounting hardware. 15,000 hrs long-life bulb. When properly mounted, may be used as combination side marker and...

Acrylic lens snap-seals onto housing. Single wire connection, grounds through mounting hardware. 15,000 hrs long-life bulb. When properly mounted, may be used as combination side marker and clearance light. 4-1/8 in W x 2 in H x 1-1/32 in D, mounts on 3 in centers.Unit: CD

Acrylic lens snap-seals onto housing. Single wire connection, grounds through mounting hardware. 15,000 hrs long-life bulb. When properly mounted, may be used as combination side marker and...

Acrylic lens snap-seals onto housing. Single wire connection, grounds through mounting hardware. 15,000 hrs long-life bulb. When properly mounted, may be used as combination side marker and clearance light. 4-1/8 in W x 2 in H x 1-1/32 in D, mounts on 3 in centers.Unit: CD

Durable, black ABS housing with two snap-on amber lenses.Unit: CD

Durable, black ABS housing with two snap-on amber lenses.Unit: CD

Industry standard PL3 socket integrated into housing. 9 to 16 V operating range. Meets FMVSS 108 requirements in horizontal, vertical or any 360 deg position. Suitable for over-80 in vehicle width...

Industry standard PL3 socket integrated into housing. 9 to 16 V operating range. Meets FMVSS 108 requirements in horizontal, vertical or any 360 deg position. Suitable for over-80 in vehicle width applications. 7-diodes, LED oval. Kit contains light, grommet and plug. Proudly made in the USA.Unit: CD

Functions as clearance, side marker or identification light and may be used as combination side marker and clearance light when properly mounted. Durable base with external mounting holes. Lens...

Functions as clearance, side marker or identification light and may be used as combination side marker and clearance light when properly mounted. Durable base with external mounting holes. Lens snap-locks onto base. Includes single lead wire and grounds through mounting screw. 3-1/4 in W x 1 in x 1-1/8 in D, mounts on 2-3/4 in centers.Unit: CD

Tough molded housing and lenses with phosphor bronze contacts for durability. Belljar design, gasketed lenses prevent water from reaching bulbs and contacts. Use as a rear light for over 80 in wide...

Tough molded housing and lenses with phosphor bronze contacts for durability. Belljar design, gasketed lenses prevent water from reaching bulbs and contacts. Use as a rear light for over 80 in wide applications. Exceeds DOT requirements for stop, turn, tail, rear and side reflector, side marker and rear clearance. Includes No.452 Belljar submersible lights, 25 ft trailer harness, 48 in trunk connector, plastic license bracket, all mounting hardware and installation instructions. Front side...